WHAT IS DENTAL IMPLANTATION?

Dental implants are considered one of the outstanding scientific achievements in dentistry. Dental implants are a method of implanting dental implants into the jawbone to replace lost tooth roots, then completing them with a porcelain crown on top. The dental implant process usually takes about 6 months. 1-6 months is the ideal time for the implant to be compatible with the jawbone. Dental implants are a solution to replace cases of tooth loss, loose teeth, and teeth that cannot function normally as before.

WHAT IS SMART IMPLANT GO (SIG) DENTAL IMPLANT?

Over time, dental implants have been researched and developed to become more and more modern with increasing compatibility and durability. SIG dental implants are an exclusive technology at Odent Dental. Odent Dental’s SIG smart implant technology completely overcomes the disadvantages of old methods and becomes one of the implant products that ensures absolute safety.

SIG smart implant tooth consists of 5 parts: Implant pillar (Titanium pillar), abutment (connector), Ticylinder (tooth core), tooth and SEC Titanium screw. The implant pillar (titanium pillar) is coated with a protein layer that meets the standards of the International Dental Association (Federal International Dental FDI). The protein layer helps promote rapid compatibility between the implant pillar and the jaw bone.

SIG Implant uses screw-in-screw technology, all components are connected together by screws. This makes the process of removing and adjusting the crown easy and quick when encountering chipping problems; absolutely does not affect the implant post. Therefore, screw-in-screw technology has the ability to prevent and minimize inflammation around the implant base.

Odent Dental Clinic supports the pre-anesthesia step to help calm the nervous system, the feeling of insecurity is gone. From there, the process of planting SIG smart implants goes more smoothly.

The outstanding feature of restoration with SIG smart implant is the relatively fast total time, only 1-2 months.

Modern implant teeth are exquisitely designed and imported directly from abroad. Standard implant teeth have chewing function equivalent to real teeth and ensure high aesthetics. The durability of SIG implant teeth is up to 20 years. Odent provides lifetime warranty for all customers using SIG smart implant teeth planting service at the dental clinic.

CASES THAT NEED SMART SIG DENTAL IMPLANT

Dentist shares that there are 5 main cases that require dental implants

Group 1: Missing 1 tooth or missing many teeth that are not close together
Group 2: Loss of many consecutive teeth
Group 3: Complete tooth loss
Group 4: Loose teeth, about to fall out, teeth no longer able to chew
Group 5: Making long-term porcelain bridges

IMAGES OF PATIENTS WITH IMPLANTATION AT ODENT

Customer: Ho Thuy My Hien (50 years old) Had 2 R26 36 implants to overcome her weak chewing condition. Difficulty chewing caused her extreme pain and discomfort. After the pandemic, she decided to do it right away to end her long-standing worries. After receiving advice and a personalized treatment plan, Ms. Hien did it right away.

Customer: Dang Thi My (20 years old) Had a Korean Dentium R46 implant with bone grafting. My and her family decided to choose an implant to overcome and eliminate bad breath, while restoring chewing function and facial aesthetics in the long term.

ABANDONING OLD METHODS BECAUSE OF THE DANGERS TO OUR OWN HEALTH POPULAR SOLUTIONS TO RESTORE LOST TEETH

1. Old cement implant technology:

Pros: Affordable.
Disadvantages:

– Cement implants pose risks to users because cement implants are made up of three main parts: implant post, joint and tooth. Cementing restorations will be very difficult to handle with the correct amount of cement required.

– Cementing restoration will result in the inability to handle excess cement, and cause inflammation and implant rejection due to excess food deposited in the excess cement. Even highly skilled doctors cannot avoid this risk.

2. Making Porcelain Bridges:

Advantages: Reasonable cost, porcelain bridge has high aesthetics and relatively improves chewing function.
Disadvantages:

– Porcelain bridges are only applicable in cases of single tooth loss, and the two teeth adjacent to the missing tooth position must be healthy to act as support.

– In the long term, the bone at the missing tooth will be lost, or the adjacent tooth that is ground down to make a pillar will gradually weaken and become damaged, leading to the loss of 3 teeth, with the risk of losing all teeth in the jaw.

– Food stuck under the bridge causes bad breath, infection, damages the two adjacent teeth, and gradually damages the entire jaw.

– Porcelain bridges have poor durability from 6 months to 5 years due to overload and inflammation of adjacent teeth.

3. Removable Dentures

Advantages: Can be applied to cases of multiple tooth loss or total tooth loss. Fast implementation time, low cost.
Disadvantages:

– Feeling loose, easy to fall off, uncomfortable, unnatural, causing pain when chewing.

– Affects adjacent teeth because the denture has an iron hook that hooks onto the 2 adjacent teeth. The strong chewing force causes the 2 adjacent teeth to loosen and fall out.

– Removable dentures must be replaced every 6 months because bone loss and soft tissue loss cause the jaw to become misaligned…

SIG SMART DENTAL IMPLANT PROCESS

Step 1: Cone beam CT X-ray.

Step 2: The doctor reads the X-ray results, consults and provides a personalized treatment plan for each Customer.

Step 3: Blood tests determine specific diseases so that the doctor can prescribe anesthetics appropriate for each customer.

Step 4: Insert the implant for 20 – 30 minutes.

Step 5: After 3-7 days, remove stitches, take X-rays and make temporary teeth impressions.

Step 6: After 15 – 30 days, install the completed porcelain tooth on the pillar and complete the implant process.

Step 7: Experience eating chewy and hard foods at Odent Dental.

Step 8: After 1 month, take an X-ray to check the abutment and porcelain tooth again.

The SIG smart dental implant procedure includes 8 steps:

Step 1: Cone beam CT X-ray.
Step 2: The doctor reads the X-ray results, consults and provides a personalized treatment plan for each Customer.
Step 3: Blood tests determine specific diseases so that the doctor can prescribe anesthetics appropriate for each customer.
Step 4: Insert the implant for 20 – 30 minutes.
Step 5: After 3-7 days, remove stitches, take X-rays and make temporary teeth impressions.
Step 6: After 15 – 30 days, install the completed porcelain tooth on the pillar and complete the implant process.
Step 7: Experience eating chewy and hard foods at Odent Dental.
Step 8: After 1 month, take an X-ray to check the abutment and porcelain tooth again.

HOME CARE AFTER SIG SMART DENTAL IMPLANTATION

After completing the SIG smart implant, the customer will be advised by the doctor on a specific follow-up schedule. During this period, you should note the following:

Within 1-2 days after implant placement:

Absolutely do not rinse or spit.
Do not hold your saliva in your mouth. Swallow your saliva normally.
Never use straws or cups to drink water or milk.
Gentle oral hygiene.
There may be bleeding, inflammation, and mild, dull pain for 1-2 days. In a few cases, there may be mild swelling of the lips and cheeks.
You can use KIN mouthwash to help wounds heal faster.
Take medication as directed by your doctor.
Absolutely do not use alcohol or stimulants while taking the medicine (7-10 days)
Eat normally and with adequate nutrition. Limit eating raw foods. Avoid chewing foods that are too hard, and avoid letting sharp objects or bones penetrate the newly implanted area.

TWithin the first 2-3 weeks after implant placement:

Absolutely do not blow your nose, sneeze or smoke.
Never push your tongue or use your hands to wipe the white patch on the wound.
Nosebleeds may occur.

Within 2-3 months after implantation:

Absolutely do not swim, fly, or exercise too hard.

CONTACT FOR AFTER CARE AFTER SIG DENTAL IMPLANTATION: : If there is any problem, please contact Customer Care Department to make an appointment with the doctor immediately. Avoid leaving it for too long, causing tooth breakage and damage to the implant in the jaw bone.

PERIODIC RE-EXAMINATION: every 6 months

WHY SHOULD YOU CHOOSE SIG IMPLANTATION AT ODENT DENTAL CLINIC?

1. PERFORMING DOCTOR

Odent Dental Clinic pays special attention to building a team of doctors with extensive expertise and experience to bring successful implant cases to the patients who trust and choose the dental clinic. Doctors with many years of experience can promptly respond to situations that arise during the SIG smart implant process.

A team of highly skilled dentists with over 15 years of experience. The doctors have been working in Japan in the field of dental implants. Choose Odent Dental Clinic because:

A team of doctors directly examines and consults with each Customer.
There are separate solutions for customers with underlying diseases such as diabetes and high blood pressure.
Doctors consult and provide personalized implant plans suitable for each different case.
Research, discuss, evaluate jaw bone density and choose the most suitable implant size for the Customer after receiving X-ray results. Odent Dental Clinic limits bone grafting if not necessary.
The doctor has many years of experience, promptly responding and handling situations that arise throughout the dental restoration process.

DOCTORS ONLY APPLY BONE GRAFT TECHNIQUE IN THE FOLLOWING 4 CASES:

Bone grafting in dental implants is a technique applied in cases where the jawbone does not have enough density and volume to support the implant.

Case 1: Bone grafting is applied to the condition of alveolar bone loss due to long-term tooth loss. Alveolar bone plays a role in supporting and covering the tooth root. Therefore, after long-term tooth loss, the alveolar bone gradually narrows in its entire volume, causing the implant to have no support or foundation when implanted.
Case 2: Customers who have worn removable dentures for a long time are often prescribed bone grafting. Because wearing removable dentures inadvertently causes the jawbone to become thinner and gradually atrophied over time.
Case 3: Congenital factors, the customer has a very thin and weak jaw bone. In this case, the doctor prescribes bone grafting to strengthen the jaw bone strength and density. The jaw bone must meet the conditions for the implant to be successful.
Case 4: The customer has a facial deformity due to unreliable dental procedures. This results in the jaw volume and structure no longer being suitable for implant placement.

2. MACHINERY AND EQUIPMENT TECHNOLOGY

Odent Dental Clinic owns the most modern facilities and equipment on the market. For dental implants, dental implants, etc., Odent Dental Clinic ensures sterile, sterilized rooms that meet medical standards to ensure the health and safety of customers. Health is always the top concern that Odent focuses on. When visiting Odent Dental Care Group, you will directly experience 3D CT Cone Beam technology that accurately describes the condition of your teeth and jaws. The CT Cone Beam machine not only helps doctors clearly identify the condition of the customer’s teeth and jaws, but also helps you clearly visualize your own case to have a detailed view of the upcoming treatment plan. CT Cone Beam is a modern machine that simulates 3D film images in Dentistry. The CT Cone Beam machine has 3 main functions. Panorama: Shows the entire structure of the maxillofacial region and goes into detail about related issues such as determining the location of cavities, impacted teeth, distinguishing between teeth that have not had root canals and teeth that have had root canals. Not only that, Panorama films also accurately show infected or periodontal teeth, the mandibular nerve, maxillary sinus, and dentures. This is very effective in developing a separate treatment plan for each different case of teeth and jaws. Customers can also easily recognize their condition. CT X-ray: Shows a 3D image of the entire maxillofacial structure. This helps doctors detect early diseases related to the customer’s maxillofacial system. Cephalo X-ray, also known as skull X-ray: Shows images of straight skull, tilted skull, and hand bones to help doctors assess and predict the growth and development of the skull and facial bone system. With the presence of CT Cone Beam, Customers can easily grasp detailed information as well as verify the condition of their teeth so that the treatment process goes more smoothly. Odent Dental Clinic wishes to bring the best quality of implant service to Customers.

3. IMPLANT FIXTURE

The implant posts at Odent Dental Clinic use a separate type and are designed from 100% pure Titanium. Titanium is a material licensed for use in dentistry in particular and Medicine in general. This is a non-corrosive, non-rusting, highly durable and extremely sturdy material. Not only that, all Odent implant posts are coated with a protein layer that meets the standards of the International Dental Association (Federal International Dental FDI). The protein layer helps promote rapid compatibility between the implant post and the jawbone. As a result, the compatibility process between the implant post and the jawbone occurs many times faster. In addition, the implant posts at Odent Dental Clinic are directly imported from abroad, ensuring all requirements for quality and safety for human health.